FAQ
Frequently asked questions
What is SurfaceWrap?
SurfaceWrap is self-adhesive vinyl wood. It has real wood texture pressed into the surface and adhesive already on the back, so you cut it to size and press it onto cabinets, doors, tables, furniture, walls and ceilings.
Which designs do you sell?
Six wood designs: Golden Oak (NW082), Honey Maple (DW652), Earthy Elegance Walnut (BW021), Washed Ash Serenade (BW015), Whispers of Oak (CW624) and Midnight Washed Oak (NW123). Each comes in six roll sizes, from 2 × 4 ft (8 sq ft) up to 4 × 41 ft (164 sq ft). Shop the designs.
Where can I buy SurfaceWrap?
Right here, or on Lowes.com.
Can I order a sample?
Yes. Every design has a sample card for $5 plus shipping, with a real piece of the vinyl on it, so you can hold it up to your cabinets, doors or walls before you buy a roll. Add one from any design page.
Do I need to be handy?
If you can measure, cut a straight line and use a squeegee, you can do this. Start with a small piece to get the feel, then move on to the bigger surfaces. Our how-to videos walk you through it step by step.
What tools do I need?
A tape measure and pencil, a straightedge, a utility knife with fresh snap-off blades, a felt-edge squeegee, scissors, a heat gun or hair dryer for the edges, and a degreaser with a clean cloth. No saws, no sanders, no paint. See them all on the how-to page.
How long does a kitchen take?
Most kitchens are a weekend project. Nothing gets torn out, so you can keep cooking the whole time.
How much do I need?
Every design page has a calculator. Enter the size of each piece you're covering and it tells you how many rolls to get, then adds them to your bag.
Can I use it in a kitchen or bathroom?
Yes. It's water resistant, stain resistant and scrubbable, and made for kitchens and bathrooms. Keep it out of standing water, like inside a shower, and off surfaces that get very hot, like cooktops.
Will it stick to my surface?
It works best on smooth, sealed surfaces like painted wood, MDF, laminate and metal. Bare drywall and raw wood need primer first, and textured walls need to be smoothed. Try the surface check for your surface.
What if I make a mistake?
SurfaceWrap isn't repositionable once it's pressed down, so line each piece up before you press it firmly. If a piece goes on wrong, cut a new one. That's why we suggest one extra small roll: it covers practice cuts and gives you a perfect match for touch-ups later.
How do I handle edges and corners?
Warm it with a heat gun or hair dryer for a few seconds. The vinyl softens and stretches, so you can wrap it around edges and into corners, then trim the extra.
Is it safe for my home?
SurfaceWrap is fire retardant (ASTM certified), IMO/MED certified, and carries a low carbon product certification and an Environmental Product Declaration. Because you refresh what you already have instead of tearing it out, far less ends up in a landfill.
How do I clean it?
It's scrubbable and washable. Use a soft cloth with mild soap and water, and skip harsh solvents.
Is there a warranty?
Yes, SurfaceWrap comes with a 1-year limited warranty.
We're happy to help.
Send us a photo of your project and your question, and we'll get back to you.
info@surfacewrap.com